Service Area
HVAC, Plumbing & Electrical Services in Brier, WA
Plumbing, heating and cooling, and electrical for Brier homes, from the Eco office in Everett.
or call (206) 970-1031
Rated 4.9 from 2,300+ Google reviews
- Licensed & Insured
- Upfront, flat-rate pricing
- Same-day & emergency service
- 100% satisfaction guarantee
- Family-owned since 2012
Local office
Serving Brier from our Everett office
4203 S 3rd AveEverett, WA 98203
4.9 330+ Google reviews for this office
Licensed electricians, plumbers and HVAC service professionals dispatched from Everett, same-day as scheduling permits, with one upfront price before any work begins.
Common services in Brier
Pick the service you need. Every one is available to Brier homes, with one upfront price before any work begins.
What big projects cost around Puget Sound
Region-wide installed price ranges that apply to Brier homes too — each guide covers the rebates and permit steps that change the math.
- Heat Pump Installation cost in the Puget Sound$12,000 – $20,000
- Electrical Panel Upgrade cost in the Puget Sound$4,000 – $16,000
- Tankless Water Heater cost in the Puget Sound$6,500 – $10,000
- Drain Cleaning cost in the Puget Sound$250 – $750
Local know-how
Good to know in Brier
The details that change home projects from city to city — Brier's utilities, rebates, and inspection rules at a glance.
Who powers Brier
Snohomish County PUD
Snohomish County PUD is the electric utility here (PSE supplies natural gas), and its instant rebates come off the bid when a registered contractor installs qualifying equipment.
- Heat pump (Snohomish PUD)Up to $2,500
- Heat pump for heating & coolingUp to $8,000 income-qualified (≤150% area median income)
- Heat pump water heater (Snohomish PUD)Up to $1,000
- Heat pump water heaterUp to $1,750 income-qualified (≤150% area median income)
Permits & inspections in Brier
WA Dept. of Labor & Industries (L&I)
Electrical work here is permitted and inspected by Washington State L&I — not the city.
We pull the permit and meet the inspector — it's part of the job, whichever authority covers your address.
The homes we work on in Brier
Brier's wooded-lot homes are mostly 1970s–1990s, with original furnaces, water heaters and panels reaching the end of their life together.
FAQ — Brier homes
Does Eco serve Brier from Everett or from Seattle?
From our Everett office on S 3rd Ave, which covers south Snohomish County. Many of our service professionals live in the county, so the person who comes out usually already knows the area.
Can my Brier home run a heat pump and an EV charger on the existing panel?
Sometimes. Many Brier homes were wired before heat pumps and home chargers were common, so the service may be smaller than both need. We do a load calculation first, then tell you whether the panel can carry both, whether a load-management device will do, or whether a service upgrade is the honest answer.
Who inspects electrical work in Brier?
Washington L&I. Brier does not run its own electrical inspection program, so permits go through the state. We pull the permit and schedule the inspection for you.
Home services for Brier, from our Everett office
Brier is the quiet corner of southwest Snohomish County, a small city of about 6,500 people between Mountlake Terrace, Lynnwood, Bothell and Lake Forest Park. It has kept its wooded lots and its residential character since it incorporated in 1965, and nine in ten homes here are owner-occupied. Eco serves Brier from our office at 4203 S 3rd Ave in Everett: licensed plumbers, electricians and heating and cooling service professionals, one team, with one upfront price before any work begins.
What Brier homes need
Houses built in the 1970s through the 1990s
The typical Brier home was built around 1986, and about three in ten predate 1980. That puts a lot of original equipment at the end of its life at the same time: water heaters on their second or third tank, furnaces from the 1990s, and electrical panels that were sized before anyone planned for a heat pump and a car charger on the same service.
Gas heat, and the choice that comes with replacing it
About two thirds of Brier homes heat with natural gas. When a furnace reaches the end, the decision is whether to replace like for like or move to a heat pump, often keeping the gas furnace as backup for the coldest nights. We check the panel and the ductwork first, so the answer is based on your house, and Snohomish County PUD rebates are part of that math for the electric options.
Big trees and long side sewers
Brier's large, treed lots mean long runs between the house and the street, and roots that find every joint in an older side sewer. Slow drains that come back every few months are usually a sewer line problem, not a fixture problem. We clear the line and run a camera so you can see the cause before choosing between repair, lining or replacement.
Permits and utilities in Brier
Brier homes are on Snohomish County PUD for electricity and PSE for natural gas. Electrical work here is permitted and inspected by Washington L&I rather than a city program, and we pull those permits and meet the inspector as part of the job.
Book service in Brier
Book online or call (206) 970-1031. Real people answer early and late, and urgent calls are prioritized.
Local office
Serving Brier from our Everett office
4203 S 3rd AveEverett, WA 98203
4.9 330+ Google reviews for this office
Licensed electricians, plumbers and HVAC service professionals dispatched from Everett, same-day as scheduling permits, with one upfront price before any work begins.
Serving Brier, WA
Same-day help and upfront pricing for Brier homeowners — electrical, plumbing, and HVAC under one roof.
Get a Free EstimateServices We Provide in Brier
Need service in Brier? Let's talk.
Talk to our team — you'll get a clear, upfront price before any work begins, and a job that's done right the first time.